-
- Used for separating finished concrete products
- Panel Pads eliminate “the” unsightly stripes gluts create, when transporting. Created as a result of uneven temperature while curing
- Panel Pads can assist reduce the rejection of panels from clients, where the finish is paramount
- Panel Pads allows air to pass between the entire face of the finished concrete product to achieve even curing
-
Silver duct tape, used for fastening elbows to spiral tube, economical method of joining builders film in areas where waterproofing is not an essential requirement.
-
Precastpro Orange duct tape, used for fastening elbows to spiral tube, economical method of joining builders film in areas where waterproofing is not an essential requirement, stronger than the average silver duct tape.
-
Specially Formulated for Precast and Formwork!!! Available in Two Formulas
- Fits nearly all types of Belt Pack reel for easy dispensing
- Available in Black, GAL, Stainless Steel
-
Specially Formulated for Precast and Formwork!!! Available in Two Formulas
- Precastpro Everyday Formwork Sealer: Formwork friendly silicone for everyday use
- COEM Formwork Sealer +: For those more extreme temperatures
-
- Used for separating finished concrete products.
- Precastpro Panel Pads eliminate “the” unsightly stripes gluts create, when transporting. Created as a result of uneven temperature while curing.
- Precastpro Panel Pads can assist reduce the rejection of panels from clients, where the finish is paramount.
- Precastpro Panel Pads allows air to pass between the entire face of the finished concrete product to achieve even curing.
-
Complies to AS3850.1:2015 WLL 20T Full Shims, packers, are used to level objects. The sizes vary from 1mm to 20mm (1,2,3,5,,10,15 and 20mm).
-
FCB’s are designed to make steel fixing easier and faster. Our Chairs are made from Virgin Plastic
- Civil Precast
- Columns & piers
- Bar spacers in conduit
- Commercial Construction
-
Ideal for precast and tilt-up applications, which require two layers of mesh.
-
FCB’s are designed to make steel fixing easier and faster. Our Chairs are made from Virgin Plastic
- Black Spacers: These are made from recycled plastic. They can cope with most standard applications and are cost effective.
- Grey Spacer: Certain projects attract heavier manufacturing traffic with compactors, as commonly seen in Bubble deck type slabs. The flexibility of the grey virgin plastic is more forgiving, also ideal for civil applications. The feet are also designed to leave a smaller footprint than the COEM black version and most others available.
- More forgiving, stable & spreads loads evenly compared to individual spacers and most others, no need to tie to mesh.
- Able to space for cost saving or linked for various slab lengths/widths.
- Saves labour and costs, increases efficiency. Speeds up installation.
-
FCB’s are designed to make steel fixing easier and faster. Our Chairs are made from Virgin Plastic
- Plastic dipped feet
- Various wire thickness available
- 4 legs for stability
- Concrete flows freely around the legs
-
FCB’s are designed to make steel fixing easier and faster. Our Chairs are made from Virgin Plastic
- Complies to AS/NZS 2425:2015: COEM Fast Clip Bar Chairs: AS/NZS 2425:2015 – 200kg
- Made from Grey Virgin Plastic: Superior Virgin raw materials for consistency and reliability
- Tested in Australia: Compliance testing in Australian NATA certified laboratories
-
Economy
- Light duty
- Made from recycled plastic
Standard
- Medium duty
- Made from quality recycled plastic
Premium
- Heavy duty
- Made from virgin plastic
-
A mechanical connection between slabs without restricting horizontal joint movement
- Wide Range Available: We stock wide range of ferrules, couplers and accessories
- Complies to Australian Standards AS3850.1:2015: Our products tested and comply to Australian Standards
- All testing done in Australia by NATA certified Laboratory: All the ferrules are batch tested by independent tester as per latest standards
-
A mechanical connection between slabs without restricting horizontal joint movement
- Wide Range Available: We stock wide range of ferrules, couplers and accessories
- Complies to Australian Standards AS3850.1:2015: Our products tested and comply to Australian Standards
- All testing done in Australia by NATA certified Laboratory: BAll the bars are batch tested by independent tester as per latest standards
-
- Grout tube plugs to seal the ends of grout tubes
- Grout tube locators for attaching the tubes to the form work
- Grout tube nailing plates to fix locators to form work
- Grout elbows to direct the grout to the tubes
- Elbow caps to prevent slurry from compromising the elbows
- 50/60 grout tube locators, versatile tube locator, designed to accomadate differnt tolerances in the grout tubes plus reduce the number of different stock items caried.
- Grout tube support chair, designed to keep the tube stable, level and horizontal
- Double sided dots to eliminate damage to formwork from drilling and fix grout tube nailing plate to formwork
- Tie Wire to fix grout tubes into position
-
The COEM 90 degree elbow fits all 40,50,and 60 HDG standard spiral grout tubes. The versatility reduces expenditure on expensive adapters. This product also saves on valuable installation time.
-
A mechanical connection between slabs without restricting horizontal joint movement
- One Elbow Fits 4 Sizes when used with reducers
- More efficient than the traditional 90 degree elbow
- Quicker application of grout
-
A mechanical connection between slabs without restricting horizontal joint movement
- Galvanised Steel Grout Tubes: Galvanised (HDG) coating options up to 50% thicker than standards tubes
- Full Range of Accessories: Elbows, locators, spacers, magnets, tape plus more
- Custom Prepared Tubes: Zero wastage, simpler handling, reduce production time, save labor costs
-
A mechanical connection between slabs without restricting horizontal joint movement
- Galvanised Steel Grout Tubes: Galvanised (HDG) coating options up to 50% thicker than standards tubes
- Full Range of Accessories: Elbows, locators, spacers, magnets, tape plus more
- Custom Prepared Tubes: Zero wastage, simpler handling, reduce production time, save labor costs
-
PVC mock joints or false joints are used in precast / in situ formwork
- High quality PVC Foam Mock Joints Foam Profiles resists splitting when nailing
- Custom sizes and lengths available To cater to your specific requirements
- UV Stabilised options available UV stabilised fillets, suitable for outdoor use
- Steel Fillets Ideal for permanent Fixture into moulds, for repeated pours
-
PVC mock joints or false joints are used in precast / in situ formwork
- High quality PVC Foam Mock Joints Foam Profiles resists splitting when nailing
- Custom sizes and lengths available To cater to your specific requirements
- UV Stabilised options available UV stabilised fillets, suitable for outdoor use
- Steel Fillets Ideal for permanent Fixture into moulds, for repeated pours
-
PVC mock joints or false joints are used in precast / in situ formwork
- High quality PVC Foam Mock Joints Foam Profiles resists splitting when nailing
- Custom sizes and lengths available To cater to your specific requirements
- UV Stabilised options available UV stabilised fillets, suitable for outdoor use
- Steel Fillets Ideal for permanent Fixture into moulds, for repeated pours
-
Fillets are utilised to create chamfered edges and impressions. These fillets are reusable
- High quality PVC Foam Fillet Foam Fillet resists splitting when nailing.
- Custom sizes and lengths available To cater to your specific requirements
- UV Stabilised options available UV stabilised fillets, suitable for outdoor use
- Steel Fillets Ideal for permanent Fixture into moulds, for repeated pours
-
Allows horizontal slab movement in two directions
- The Majority of dowel kit manufacturers price and sell each section of the kit separately.
- The Precastpro dowel sleeve is sold and priced as a kit. Over the course of a project, the saving can be extensive.
- Sleeve kits includes: Sleeve, nailing plate and end plug.
-
Allows horizontal slab movement in two directions
- 350 Grade Steel High strength carbon structural steel.
- Plate material complies to AS/NZS 3679.1 Ensuring the quality and consistency of bars
- HGD complies to AS/NZS 4680 Better galvanisation for longer bar life in concrete
- All testing done in Australia by NATA certified Laboratory All the plates are batch tested by independent tester as per latest standards
-
A mechanical connection between slabs without restricting horizontal joint movement
- 350 Grade Steel Stronger steel bar maintains flat floors for longer periods.
- Bar material complies to AS/NZS 3679.1 Ensuring the quality and consistency of bars
- HGD complies to AS/NZS 4680 Better galvanisation for greater bar life in concrete.
- All testing done in Australia by NATA certified Laboratory All the bars tested by independent tester as per latest standards.
